⏱ 10 min read  ·  ✅ Updated Nov 2026

Gaming foot pedals are USB foot switches that sit on the floor under a desk and send keyboard, mouse, multimedia, or game controller inputs to a PC when pressed. Players and streamers commonly assign them to functions such as push-to-talk in voice chat, muting a microphone, switching scenes in broadcasting software, or triggering a single key or key combination that would otherwise require taking a hand off the keyboard or mouse. Most models are standard HID devices, so the computer reads them much like an extra keyboard once configured.

Our top pick: Elgato Stream Deck Pedal. Runner-up: iKKEGOL Upgraded USB Triple Foot Pedal Switch.

The five pedals in this guide cover the main shapes the category takes: a single-pedal switch for one dedicated function, several triple-pedal boards with three programmable inputs, and one model built specifically for streaming software. They differ in switch type, in how they are programmed, and in which operating systems the setup software supports.

As an Amazon Associate, we earn from qualifying purchases.

How to Choose

Pedal count is the first decision. A single pedal handles one job, such as a push-to-talk key, and takes up very little floor space. Triple-pedal boards provide three separate inputs on one unit, which suits setups that combine voice chat control, a media function, and a game key on the same device. Most boards place the three pedals side by side in a fixed row, so the footprint is wider than a single switch.

Switch type affects how a pedal feels and sounds, based on how each listing describes it. Optical and photoelectric switches use a light sensor instead of a physical contact, and listings for these models describe them as quiet in operation. Mechanical switches use a physical micro switch and are described as providing tactile, clicky feedback. The choice comes down to whether a quiet press or a defined click matters more in the room where the pedal will be used.

Programmability is handled through software, and the workflow differs by brand. Most of the generic HID pedals here are configured with the ElfKey or FootSwitch software on a Windows PC, and some offer a Mac version too. The assigned functions are stored on the pedal itself, so after setup the pedal can be moved to another computer and used as a standard HID device. The Elgato model works differently, because its pedals trigger actions inside the Stream Deck software, which needs to be running on the connected computer.

Connection and cable length are worth checking against the desk layout. All five models are wired, with USB-A on most and USB-C on the Elgato. Listed cable lengths run from 1.8 meters to 2 meters on the models that state a length, enough to route from a tower under a desk to the floor in front of a chair. Finally, several listings mention rubber pads or anti-slip feet intended to keep the unit in place on hard floors.

Elgato Stream Deck Pedal

The Elgato Stream Deck Pedal is the streaming-focused option in this group. It has three pedals across a single wide unit, and each pedal triggers actions configured in Elgato’s Stream Deck software rather than sending a fixed keyboard key. The listing describes it as a hands-free studio controller for apps and software such as OBS, Twitch, and YouTube, and it works with both Mac and PC. Typical assignments include switching scenes, toggling sources, muting audio, and starting or stopping recordings.

Because the pedals act through the Stream Deck application, this model fits desks that already run that software. It connects by a wired USB-C cable and is listed with the model number 10GBF9901. Unlike the HID boards below, its functions are not stored as keyboard input on the device, so the software is part of everyday use rather than a one-time setup step.

Specs

    • Pedals: 3
    • Model number: 10GBF9901
    • Connection: USB-C, wired
    • Software: Elgato Stream Deck software
    • Compatibility: Windows and macOS, as listed
    • Manufacturer: Corsair

    iKKEGOL Upgraded USB Triple Foot Pedal Switch

    The iKKEGOL Upgraded USB Triple Foot Pedal Switch, model 10717, is a three-pedal board built around optical switches, which the listing describes as a quiet design suited to shared rooms and offices. Each pedal can be assigned a single keyboard function, a shortcut or combined key, a mouse click, a text string, multimedia control, or a game action. Configuration is done in the PCsensor FootSwitch software on a Windows PC, and the listing states that once a pedal is programmed it can be plugged into Mac, Linux, or Android systems and used with the stored assignments.

    The board measures 14.5 by 5.6 by 1.7 inches and weighs 14.8 ounces, with a 1.8 meter USB cable. The pedals are wide with a patterned surface, and the listing notes that more than one unit can be connected to the same PC when each is programmed individually. For players who want three programmable inputs without streaming-specific software, this is the straightforward HID route.

    Specs

      • Pedals: 3
      • Model number: 10717
      • Switch type: Optical
      • Dimensions: 14.5 x 5.6 x 1.7 inches
      • Weight: 14.8 ounces
      • Cable: USB, 1.8 m (6 ft)
      • Programming: FootSwitch software on Windows, stored on the device

      LYRIXEN USB Triple Foot Pedal

      The LYRIXEN USB Triple Foot Pedal, model FS2020TU1SW, is sold in two switch versions: a mechanical version described as tactile for gaming, and an optical version described as silent and non-contact for studio work. Its five mapping modes cover keyboard keys and combinations, mouse clicks and scrolling, text strings, multimedia controls, and game controller input, and the listing states that complex macros with sequences of keys and customizable delays can be recorded. Assignments are kept in onboard memory, so the pedal keeps its setup when moved between computers.

      Setup uses the ElfKey configuration software, which the listing provides for Windows and macOS for the initial remapping. The pedal connects over an integrated USB-A cable listed at 6.6 feet, and compatibility is listed for PC, Mac, and Linux. This is the model in the group that offers a choice between the two switch styles on the same board design.

      Specs

        • Pedals: 3
        • Model number: FS2020TU1SW
        • Switch type: Mechanical or optical versions, as listed
        • Cable: USB-A, 6.6 ft (2 m), integrated
        • Memory: Onboard memory for stored assignments
        • Software: ElfKey for Windows and macOS, initial setup
        • Modes: Keyboard, mouse, string, multimedia, and game controller

        PCsensor USB Foot Pedal FS2020U1

        The PCsensor FS2020U1 is a three-pedal board from the company behind the ElfKey software that several pedals in this category use. It uses photoelectric switches, which the manual describes as a shaftless design for quiet operation, and each pedal can be configured for single key presses, key combinations, hotkeys, mouse actions including scrolling, multimedia controls, or custom strings of up to 38 characters. The manual also lists a macro mode with optional delays and a choice between single trigger and continuous trigger behavior.

        Configuration is done in ElfKey on Windows or Mac, and the manual states that the programmed settings are stored on the pedal’s internal chip. After setup, the pedal works as an HID device across Windows, Mac, Linux, Android, and iOS without the software running. The board measures 14.45 by 5.63 by 1.77 inches, connects over an integrated USB-A cable, and has anti-slip TPU rubbers on the base, with screw holes listed for optional fixed mounting.

        Specs

          • Pedals: 3
          • Model number: FS2020U1
          • Switch type: Photoelectric
          • Dimensions: 14.45 x 5.63 x 1.77 inches
          • Connection: USB-A, integrated cable
          • Software: ElfKey for Windows and Mac configuration
          • Functions: Keys, combinations, mouse actions, multimedia, strings up to 38 characters

          iKKEGOL USB Foot Pedal Switch

          The iKKEGOL USB Foot Pedal Switch, model 10731, is the single-pedal option in this guide. It assigns one function to one wide pedal, which matches focused uses such as a dedicated push-to-talk key, a mute toggle, or a single repeated game input. Like the triple model above, it is a programmable HID device that can send a keyboard key or combination, a mouse click, a text string, a multimedia command, or a game action, set through the ElfKey software available from PCsensor.

          The unit measures 3.9 by 2.8 by 1.3 inches and weighs 5.8 ounces, so it fits in the floor space beside a PC tower or under a desk edge where a full triple board would not. The listing gives a 2 meter USB cable, a wide pedal surface, and four TPU rubber pads on the base for use on hard floors. It is the simplest configuration here, with nothing to configure beyond the one assignment.

          Specs

            • Pedals: 1
            • Model number: 10731
            • Dimensions: 3.9 x 2.8 x 1.3 inches
            • Weight: 5.8 ounces
            • Cable: USB, 2 m
            • Programming: ElfKey software, one stored function
            • Base: Four TPU rubber pads, as listed

            Side-by-Side Comparison

            The Elgato Stream Deck Pedal is the only model here that runs through streaming software instead of storing keyboard assignments on the device, so it suits streamers who already use Stream Deck. The three triple-pedal HID boards are closer: the iKKEGOL 10717 uses optical switches and is programmed on Windows only, the LYRIXEN adds a mechanical switch option and Mac setup software, and the PCsensor FS2020U1 uses photoelectric switches with the widest listed post-setup system support. The single iKKEGOL 10731 trades pedal count for the smallest footprint.

            Product Pedals Switch Type Cable Setup Software
            Elgato Stream Deck Pedal 3 Not specified in listing USB-C Stream Deck software
            iKKEGOL Upgraded USB Triple Foot Pedal Switch 3 Optical USB, 1.8 m FootSwitch on Windows
            LYRIXEN USB Triple Foot Pedal 3 Mechanical or optical USB-A, 6.6 ft ElfKey on Windows and macOS
            PCsensor USB Foot Pedal FS2020U1 3 Photoelectric USB-A ElfKey on Windows and Mac
            iKKEGOL USB Foot Pedal Switch 1 Not specified in listing USB, 2 m ElfKey

            FAQ

            Do gaming foot pedals work with any game?

            The HID models in this guide send standard keyboard and mouse input, so they work in games and applications that accept those inputs, with each pedal acting as the key or click it was assigned. The Elgato Stream Deck Pedal works through the Stream Deck software instead, so it depends on that application running. Some games and platforms have their own rules about macro software, so it is worth checking the rules of a specific title before assigning multi-step macros to a pedal.

            What is the difference between optical and mechanical foot pedals?

            Optical and photoelectric pedals register a press with a light sensor and no physical contact point, and listings describe them as quiet. Mechanical pedals use a physical micro switch, and listings describe the result as tactile, clicky feedback. The practical difference is the feel and sound of each press.

            Can one foot pedal send a key combination or a macro?

            Yes, within the limits each listing states. The programmable models here can assign key combinations such as a modifier plus a letter, and the LYRIXEN and PCsensor models also list macro recording with sequences of keys and optional delays. The PCsensor manual lists text strings of up to 38 characters as another assignable function.

            Do these foot pedals work on Mac and Linux?

            Most of them do, with a setup caveat. The iKKEGOL triple board is programmed on a Windows PC first and then used on Mac, Linux, or Android with the stored assignments. The LYRIXEN and PCsensor models offer configuration software for Mac as well as Windows, and the PCsensor manual lists Linux, Android, and iOS as supported after setup. The Elgato Stream Deck Pedal is listed for both Windows and macOS through the Stream Deck software.

            Final Verdict

            For streaming desks, the Elgato Stream Deck Pedal is the natural fit because its three pedals control scenes, sources, and audio inside the Stream Deck software that many broadcast setups already run. For general gaming and voice chat use, the triple HID boards cover the same three-input layout at a simpler level: the iKKEGOL 10717 for a quiet optical board programmed on Windows, the LYRIXEN for a choice of mechanical or optical switches with Mac setup software, and the PCsensor FS2020U1 for photoelectric switches and broad post-setup compatibility. Anyone who needs exactly one foot-controlled function can skip the wide boards entirely and use the compact iKKEGOL 10731. Matching pedal count and setup software to the desk in question matters more than any other difference in this category.

            Product and ASIN Reference

            Product ASIN
            Elgato Stream Deck Pedal B09PRMCTGB
            iKKEGOL Upgraded USB Triple Foot Pedal Switch B088WCG7L4
            LYRIXEN USB Triple Foot Pedal B0G98KWCGS
            PCsensor USB Foot Pedal FS2020U1 B08SLX75K8
            iKKEGOL USB Foot Pedal Switch B08MC456TC

            Explore Our Guides & Free Tools