⏱ 10 min read  ·  ✅ Updated Nov 2026

Gaming hardware is held together by small, often uncommon screws. Controllers use tiny Phillips and tri-point fasteners, consoles hide Torx security screws under their covers, and PC cases mix hex, Phillips, and standoff hardware. A household screwdriver set rarely includes the sizes and profiles these devices need, which is why a dedicated precision kit belongs on any gaming workbench.

Our top pick: iFixit Mako Driver Kit. Runner-up: iFixit Pro Tech Toolkit.

The five sets below were chosen for their bit coverage across controllers, consoles, and PCs. They range from a compact 24-piece kit built around common console fastener sizes to full toolkits that add pry tools, tweezers, and opening picks alongside the driver bits. Each entry lists bit types, handle design, case, and accessories as the maker or retailer lists them.

As an Amazon Associate, we earn from qualifying purchases.

How to Choose a Precision Screwdriver Set for Gaming Gear

Start with the fasteners your devices actually use. Xbox controllers and many console shells use Torx and Torx security screws, commonly in the T6 to T10 range, while Nintendo hardware is known for tri-point screws and the older Gamebit profile. PlayStation controllers rely mainly on small Phillips screws, and PC building adds hex bits, nut drivers for motherboard standoffs, and larger Phillips sizes. A kit listing Torx, Torx security, tri-point, Phillips, hex, and Gamebit profiles covers the widest range of gaming hardware.

Bit material matters because a soft bit can round out a tiny screw head. Makers list two common steels here: S2 steel, used in the iFixit kits below, and chrome vanadium steel, often shortened to CR-V, used by STREBITO, XOOL, and JOREST. Several listings also state a hardness rating of 60 HRC. Check that the sizes you need most, such as T6, T8, and T9 Torx, are present before choosing on bit count alone.

Handle design affects control on small screws. A swivel cap lets you hold the driver steady with one finger while turning the shaft, and a magnetic bit socket or magnetic tip helps keep tiny screws on the bit instead of dropping them inside a controller shell. Rubberized or knurled grips are listed on several sets below for the same reason.

Finally, look at what comes besides bits. Flexible extension shafts reach recessed screws, a magnetizer can refresh a bit’s hold on screws, and pry tools, spudgers, opening picks, and tweezers help separate clipped plastic shells without using the driver as a lever. A fitted, labeled case keeps dozens of similar-looking bits organized. One neutral caution applies to every set here: opening a console or controller can affect its manufacturer warranty, so check the terms for your device first.

iFixit Mako Driver Kit

The Mako Driver Kit is iFixit’s standalone driver set, built around a single aluminum handle and 64 precision bits in the 4 mm format. The bit selection is the broadest here for gaming-specific profiles: alongside Phillips, flathead, Torx, and hex, the listing includes Torx security, tri-point, and Gamebit bits, plus pentalobe, JIS, nut driver, square, spanner, triangle, SIM eject, oval, magnetic pickup, and standoff bits. That range covers modern controllers and consoles as well as older Nintendo hardware.

The handle is anodized aluminum with a knurled grip, a magnetic bit socket, and a swivel top, and the bits are S2 steel. A flexible extension is included for screws set deep inside a housing. The Amazon listing gives the model number IF145-299-4 and a listed weight of 13.8 ounces. For a player who mainly needs the driver and bits themselves, this is the most focused option here, and the listing also describes a lifetime guarantee from iFixit.

Specs

  • Bits: 64 precision bits, 4 mm format
  • Bit material: S2 steel
  • Handle: anodized aluminum, magnetic bit socket, knurled grip, swivel top
  • Key bit types: Torx, Torx security, tri-point, Gamebit, Phillips, hex, pentalobe, JIS
  • Included accessory: flexible extension
  • Model: IF145-299-4

iFixit Pro Tech Toolkit

The Pro Tech Toolkit builds a full repair bench around the same 64-bit driver kit used in the Mako set. Its S2 steel bits cover Phillips, flathead, Torx, Torx security, pentalobe, JIS, hex, tri-point, nut driver, square, Gamebit, spanner, triangle, and more, and the toolkit adds the opening and handling tools that shell work requires. The Amazon listing for model IF145-307-4 counts 87 pieces in total.

Listed contents include three tweezers (nylon-tipped reverse tweezers, angled ESD tweezers, and blunt ESD tweezers), a spudger, a halberd spudger, a metal spudger, a Jimmy opening tool, three iFixit opening tools, six opening picks, a small suction cup, an anti-static wrist strap, a magnetic pad, and a flexible extension. The bits sit in a case whose magnetically attached lid doubles as a sorting tray, and the full kit packs into a tool roll. It suits anyone who opens consoles and PCs regularly and wants the prying, gripping, and screw-sorting tools in the same package as the driver set.

Specs

  • Bits: 64 precision bits, 4 mm format
  • Bit material: S2 steel
  • Handle: aluminum driver handle with swivel cap
  • Total pieces: 87 as listed
  • Opening tools: spudgers, metal spudger, Jimmy, opening tools, 6 opening picks, suction cup
  • Other tools: 3 tweezers, anti-static wrist strap, magnetic pad, flex extension
  • Storage: bit case with sorting-tray lid, tool roll
  • Model: IF145-307-4

STREBITO 64-Piece Precision Screwdriver Set

STREBITO’s 64-piece kit pairs 48 chrome vanadium steel bits with a set of opening accessories in a slim plastic case. The bit list is detailed on the product page: Phillips PH000 through PH2, flathead SL1.0 through SL4.0, Torx T1 through T4, Torx security T5H through T20H, triwing Y0.6 through Y3.0, pentalobe P0.8 and P1.2, hex H0.9 through H3.0, plus triangle, U-type, square, SIM, MID, oval, Gamebit G3.8 and G4.5, and nut driver bits. The Gamebit pair and the wide Torx security range make it a natural fit for console work, and the maker lists the bits as CNC-machined at 60 HRC hardness.

The handle has a smooth swivel cap, an anti-slip rubberized grip, and a built-in magnet, plus a magnetizer. The accessory set covers shell opening: a suction cup, pointed tweezers, six opening picks, three pry tools, a hook tool, a spudger, and a cleaning brush. Bits sit in a labeled rubber holder inside the case, which the listing measures at 7.87 by 6.3 by 0.74 inches and 11.7 ounces.

Specs

  • Total pieces: 64
  • Bits: 48 chrome vanadium steel bits, listed hardness 60 HRC
  • Key bit types: Torx security T5H to T20H, triwing, Gamebit G3.8 and G4.5, Phillips, hex, pentalobe
  • Handle: swivel cap, rubberized anti-slip grip, built-in magnet
  • Accessories: suction cup, tweezers, 6 opening picks, 3 pry tools, hook tool, spudger, brush, magnetizer
  • Case: plastic case with labeled rubber bit holder
  • Size and weight: 7.87 x 6.3 x 0.74 inches, 11.7 ounces as listed

XOOL 82-in-1 Precision Screwdriver Set

The XOOL 82-in-1 set combines 58 chrome vanadium bits with 24 accessories, the largest total count in this group. The bit specification on the product page lists Torx T2 through T7, Torx security T8, T9, T10, T15, and T20, tri-point Y0.6, Y1.5, Y2, and Y3, pentalobe 0.8 and 1.2, Phillips PH000 through PH2, flathead, Pozidriv, hex from 0.7 to 4.0, nut drivers, square, triangle, a spanner bit, and a SIM eject bit. XOOL lists the bits at 60 HRC hardness with a nickel-plated finish.

The driver handle is rubberized with a swivel top and a magnetic bit holder, and the kit adds both a flexible extension shaft for recessed screws and an adjustable extension rod. Accessories listed on the page include a magnetizer, ESD tweezers, and a spudger among the 24 extras. Storage is a shock-resistant ABS case, and each bit sits in a correspondingly marked slot, which helps when 58 similar bits need to go back in the right places.

Specs

  • Total pieces: 82
  • Bits: 58 chrome vanadium bits, listed hardness 60 HRC, nickel plating
  • Key bit types: Torx T2 to T7, Torx security T8 to T20, tri-point, Phillips, hex, pentalobe, nut driver
  • Handle: rubberized grip, swivel top, magnetic bit holder
  • Accessories: flexible shaft, extension rod, magnetizer, ESD tweezers, spudger, 24 accessories in total
  • Case: shock-resistant ABS case with marked bit slots

JOREST 24-Piece Precision Screwdriver Set

The JOREST 24-piece set is the compact option here, aimed at the fastener sizes that come up most often on consoles and controllers. The listing highlights Torx T5, T6, T8, T9, and T15, triwing Y00, pentalobe P5, and Phillips PH00 among its head sizes, and the product title positions the kit for PS5, PS4, Switch, and Xbox work as well as laptops and phones. For a single controller shell or console cover job, that short list covers the usual suspects without a large case of bits to sort through.

The bits are chrome vanadium steel with a magnetic tip, and the included components listed are the handle, the screwdriver bits, and tweezers. The Amazon listing gives the model number AJJOJM0301ORDJPR1S. With 24 pieces, it is the set to keep in a desk drawer for battery swaps, shell screws, and controller work, rather than a full bench kit.

Specs

  • Total pieces: 24
  • Bit material: chrome vanadium steel
  • Tip: magnetic
  • Highlighted sizes: Torx T5, T6, T8, T9, T15, triwing Y00, pentalobe P5, Phillips PH00
  • Included components: handle, screwdriver bits, tweezers as listed
  • Model: AJJOJM0301ORDJPR1S

Comparison

The five sets split into three tiers. The JOREST kit is the compact pick with 24 pieces focused on common console sizes. The Mako, STREBITO, and XOOL sets sit in the middle, each built around one handle with 48 to 64 bits, differing mainly in bit material and accessories: the Mako uses S2 steel bits and keeps extras minimal, while the STREBITO and XOOL kits use chrome vanadium bits and add opening tools. The Pro Tech Toolkit is the full bench option, pairing the 64-bit driver set with prying and handling tools in a tool roll.

Set Bits Bit material Notable extras Storage
iFixit Mako Driver Kit 64 S2 steel Flexible extension Kit case
iFixit Pro Tech Toolkit 64 S2 steel Tweezers, spudgers, picks, suction cup, wrist strap Tool roll, sorting-tray lid
STREBITO 64-Piece 48 Chrome vanadium steel Pry tools, picks, spudger, magnetizer Plastic case, labeled holder
XOOL 82-in-1 58 Chrome vanadium steel Flexible shaft, extension rod, magnetizer ABS case, marked slots
JOREST 24-Piece 24 pieces total Chrome vanadium steel Tweezers Compact kit

FAQ

Which screwdriver bits do I need for an Xbox controller?
Xbox controllers commonly use Torx and Torx security screws, with T6, T8, and T9 among the sizes listed for this work. Every set here includes small Torx bits, and the Mako, Pro Tech, STREBITO, and XOOL kits also list Torx security bits, which have a center hole that fits the pin in security fasteners.

What is a tri-point bit used for in gaming gear?
Tri-point, also sold as triwing, is the three-winged profile used on many Nintendo devices and accessories. The Mako and Pro Tech kits list tri-point bits, the STREBITO kit lists triwing Y0.6 through Y3.0, the XOOL kit lists tri-point Y0.6 through Y3, and the JOREST kit highlights a Y00 triwing bit.

Does a magnetic tip really help with controller screws?
A magnetic socket or tip holds a small screw on the end of the bit while you guide it into or out of a recessed hole, which reduces the chance of dropping it inside a shell. The Mako handle has a magnetic bit socket, the XOOL handle has a magnetic bit holder, and the STREBITO and JOREST sets list magnetic tips or a built-in magnet.

Will opening my console or controller affect its warranty?
It can. Manufacturers set their own warranty terms, and opening a device is one of the actions those terms may cover. Check the warranty terms for your specific console or controller before removing any screws, and keep track of the screws and parts you remove so the device can be reassembled in order.

Final Verdict

For most gaming setups, the iFixit Mako Driver Kit is the cleanest buy: 64 S2 steel bits, Gamebit and tri-point coverage for Nintendo hardware, Torx security for consoles, and a well-shaped aluminum handle, all in one case. The Pro Tech Toolkit is the step up for anyone who also wants spudgers, picks, tweezers, and a sorting tray in the same package. STREBITO and XOOL deliver similar bit coverage in chrome vanadium steel with more accessories included. The JOREST 24-piece kit is the drawer-friendly option for the handful of sizes console and controller work calls for most.

Product and ASIN Reference

Product ASIN
iFixit Mako Driver Kit B0189YWOIO
iFixit Pro Tech Toolkit B01GF0KV6G
STREBITO 64-Piece Precision Screwdriver Set B0F61RV7ZP
XOOL 82-in-1 Precision Screwdriver Set B0718ZM6R1
JOREST 24-Piece Precision Screwdriver Set B0BQR2MRQP

Explore Our Guides & Free Tools